Filter
Top Products
50
WPS (Android Only)
1 Enable the camera’s built-in Wi-Fi.
Press the G button to display the menus,
then highlight Wi-Fi in the setup menu and
press 2.
Highlight Network connection
and press 2, then highlight Enable and
press J.
Wait a few seconds for Wi-Fi to
activate.
2 Connect.
Enable WPS button connections on the camera and smart device:
• Camera: Highlight Network settings and
press 2.
Highlight Push-button WPS and press 2
to ready the camera for a WPS connection.
The camera will wait about two minutes
for a WPS connection request from the
smart device.
To extend the wait time,
press J.
• Smart device: Select Wi-Fi settings > WPS button connection.
3 Launch the Wireless Mobile Utility.
Launch the Wireless Mobile Utility on the smart device.
The main dialog will be
displayed.
G button