! '
~
J
.i.-
~---
This camera allows you
to
imprint Year/Month/Day, Day/Hour/Minute (24-
hour clock), Month/Day/Year or Day/Month/Year on your picture
in
any
exposure mode. (For imprinting date/time, see page 39.)
.....................................................
• Adjusting date and time (Example: year 2001, January 15)
1
Push MODE button to select one of the
date or time displays. Push SELECT
button
so
section to be corrected starts
blinking.
• Date cannot be set
in
Day/Hour/Minute display.
To
set date, select Year/Month/Day, Month/Day/Year or
Day/Month/Year.
• Set the time
in
Day/Hour/Minute display.
2
Push ADJUST button to change the
blinking numbers and after correction,
push SELECT button until the numbers
stop blinking .
•
Each
time you push the ADJUST button, year section
moves up from 98 to 49 (back to 98 after
49)
.
•
To
change the numerical indication rapidly, hold the
ADJUST button down
for
more than 1 sec .
• Push SELECT button until the date/time display
stops blinking. When the imprint indicator -
appears
in
the data imprint LCD panel, the setting
is complete.
NOTE:
Battery
requirements
for
imprinting
Imprinting
of
date/time requires one CR2025 3V lithium battery separate from the
batteries required for the camera body. Battery life is approx.
3 years. When the
imprinting on the photo appears faded and/or the display
of
the data imprint on
the LCD becomes faint or disappears, this indicates low battery power. Replace
the battery (making sure to set correct date/time after changing battery).
22