Nikon 18208133048 Digital Camera User Manual


 
54
x
D The Live View Display
Although they will not appear in the final picture, jagged edges, color fringing, moire, and
bright spots may appear in the monitor, while bright bands may appear in some areas with
flashing signs and other intermittent light sources or if the subject is briefly illuminated by a
strobe or other bright, momentary light source. In addition, distortion may occur if the
camera is panned horizontally or an object moves at high speed through the frame. Flicker
and banding visible in the monitor under fluorescent, mercury vapor, or sodium lamps can
be reduced using Flicker reduction (0 252), although they may still be visible in the final
photograph at some shutter speeds.
When shooting in live view mode, avoid pointing the
camera at the sun or other strong light sources.
Failure to observe this precaution could
result in damage to the camera’s internal circuitry.
A Exposure
Depending on the scene, exposure may differ from that which would be obtained when live
view is not used.
Metering in live view is adjusted to suit the live view display, producing
photographs with exposure close to what is seen in the monitor.
In P, S, A, and M modes,
exposure can be adjusted by ±5 EV (0 112).
Note that the effects of values over +3 EV or
under –3 EV can not be previewed in the monitor.