Filter
Top Products
175
t
The GP-1 GPS Unit
The GP-1 GPS unit (available separately) can be connected to the camera’s accessory
terminal (0 298) using the cable supplied with the GP-1, allowing information on the
camera’s current position to be recorded when photographs are taken.
Turn the
camera off before connecting the GP-1; for more information, see the GP-1 manual.
❚❚ Setup Menu Options
The GPS item in the setup menu contains the options listed below.
• Standby timer: Choose whether the exposure meters turn off automatically when the
GP-1 is attached.
• Position: This item is only available if the GP-1 is connected, when it displays the
current latitude, longitude, altitude, and Coordinated Universal Time (UTC) as
reported by the GP-1.
• Use GPS to set camera clock: Select Ye s to synchronize the camera clock with the time
reported by the GPS device.
Option Description
Enable
Exposure meters turn off automatically if no operations are performed for the
time selected for Custom Setting c2 (Standby timer, 0 227; to allow the camera
time to acquire GPS data, the delay is extended by up to one minute after the
exposure meters are activated or the camera is turned on).
This reduces the drain
on the battery.
Disable Exposure meters do not turn off while the GP-1 is connected.
A Coordinated Universal Time (UTC)
UTC data is provided by the GPS device and is independent of the camera clock.
A The n Icon
Connection status is shown by the n icon:
• n (static): Camera has established communication with GP-1.
Photo information for pictures taken while this icon is displayed
include an additional page of GPS data (0 183).
• n (flashing): The GP-1 is searching for a signal.
Pictures taken while
the icon is flashing do not include GPS data.
• No icon: No new GPS data have been received from the GP-1 for at
least two seconds.
Pictures taken when the n icon is not displayed do not include GPS
data.