Filter
Top Products
19
The Basics of Shooting and Playback
Turning the Camera On and Off
• When the camera is turned on, the power-on lamp (green) will light and then the monitor
will turn on (the power-on lamp turns off when the monitor turns on).
• To turn off the camera, press the power switch. When the camera turns off, the power-on
lamp and the display turn off.
• Press and hold the c (shooting/playback mode) button to turn on the camera and switch
to playback mode.
C Power Saving Function (Auto Off)
• If no operations are performed for about three minutes, the monitor will turn off, the camera will
enter standby mode, and the power-on lamp will flash. If no operations are performed for
approximately another three minutes, the camera will turn off automatically.
While the camera is in standby mode, the monitor turns back on if you perform any of the
following operations:
➝ Press the power switch, shutter-release button, c (shooting/playback mode) button, or
b(e movie-record) button
• The camera will enter standby mode within 30 minutes while playing a slide show.
1 5m 0s
15m 0s
7 80
780
Flashes
No operations
performed
No operations
performed
3 min
Camera enters
standby mode.
Camera turns off.
3 min