Nikon 26444 Digital Camera User Manual


 
E40
Reference Section
B Notes About Continuous Shooting
When a setting other than Single is selected, the flash cannot be used. Focus, exposure, and white
balance are fixed at the values determined with the first image in each series.
It may take some time to save the images after shooting.
When ISO sensitivity increases, noise may appear in captured images.
The frame rate for continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
When using Pre-shooting cache, Continuous H: 120fps, Continuous H: 60fps, or Multi-
shot 16, banding or variance in brightness or hue may occur in images that were captured under
lighting that flickers at high speeds, such as fluorescent, mercury-vapor, or sodium-vapor lighting.
Some functions cannot be used with other menu options (A58).
j Continuous H:
60 fps
Each time the shutter-release button is pressed all the way, images
are captured at a high speed rate.
The frame rate for continuous shooting is about 60 fps and the
maximum number of continuous shots is 25.
Image mode is fixed at M (image size: 1280 × 960 pixels).
DBSS
(Best Shot Selector)
While the shutter-release button is held all the way down, the camera
captures a series of up to ten images and automatically saves the
sharpest image.
Use when shooting a stationary subject in a place where flash
photography is prohibited and camera shake is likely to occur.
WMulti-shot 16
Each time the shutter-release button is
pressed all the way down, the camera
captures a series of 16 images and saves it as
a single image.
The frame rate for continuous shooting is
about 30 fps.
Image mode is fixed at L (image size:
2560 × 1920 pixels).
Digital zoom cannot be used.
Option Description