Filter
Top Products
E89
Reference Section
Refer to the table below if an error message is displayed.
Error Messages
Display Cause/Solution
A
Battery temperature is
elevated.
The camera will turn off.
The camera turns off automatically. Wait until the camera
or battery temperature has cooled before resuming use.
–
The camera will turn off
to prevent overheating.
Memory card is write
protected.
The write-protect switch is in the “lock” position. Slide the
write-protect switch to the “write” position.
–
This card cannot be used. An error occurred while accessing the memory card.
• Use an approved card.
• Check that the terminals are clean.
• Confirm that the memory card is correctly inserted.
14, F 22
This card cannot be read.
Card is not formatted.
Format card?
The memory card has not been formatted for use in the
camera.
Formatting deletes all data saved on the memory card. If
you need to keep copies of any images, make sure to
select No and save the copies to a computer or other
medium before formatting the memory card. Select Yes
and press the k button to format the memory card.
F5