F7
Technical Notes and Index
If the camera fails to function as expected, check the list of common problems below before
consulting your retailer or Nikon-authorized service representative.
Power, Display, Settings Issues
Troubleshooting
Problem Cause/Solution A
The camera is on but does
not respond.
Wait for recording to end.
If the problem persists, turn the camera off.
If the camera does not turn off, remove and reinsert
the battery or batteries or, if you are using an AC
adapter, disconnect and reconnect the AC adapter.
Note that although any data currently being
recorded will be lost, data that have already been
recorded will not be affected by removing or
disconnecting the power source.
20, E 80
Battery inserted in the
camera cannot be charged.
• Confirm all connections.
• When connected to a computer, the camera
may not charge for any of the reasons described
below.
- Off is selected for Charge by computer in
the setup menu.
- Battery charging stops if the camera is turned
off.
- Battery charging is not possible if the
camera’s display language and date and time
have not been set, or the date and time were
reset after the camera’s clock battery was
exhausted. Use the Charging AC Adapter to
charge the battery.
- Battery charging may stop if the computer is
in sleep mode.
- Depending upon the computer
specifications, settings, and status, battery
charging may not be possible.
12
74, E 71
–
16, 18
–
–
The camera cannot be
turned on.
The battery is exhausted. 20