Filter
Top Products
E55
Reference Section
Refer to the table below if an error message is displayed.
Error Messages
Display Cause/Solution
A
Battery temperature is
elevated. The camera
will turn off.
The camera turns off automatically. Wait until the camera or
battery temperature has cooled before resuming use.
–
The camera will turn off
to prevent overheating.
Memory card is write
protected.
The write-protect switch is in the “lock” position.
Slide the write-protect switch to the “write” position.
–
This card cannot be
used.
An error occurred while accessing the memory card.
• Use an approved card.
• Check that the terminals are clean.
• Confirm that the memory card is correctly inserted.
F23
12
12
This card cannot be
read.
Card is not formatted.
Format card?
The memory card has not been formatted for use in the
camera.
Formatting deletes all data saved on the memory card. If you
need to keep copies of any images, make sure to press
flexible button 4 (S No) and save the copies to a computer
or other medium before formatting the memory card. Press
flexible button 3 (R Yes) to format the memory card.
F7
Out of memory. Delete images or insert a new memory card.
12, 25,
64