Filter
Top Products
E74
Reference Section
Blink Warning
Select whether or not the camera detects human subjects that have blinked
using face detection (A81) when shooting in the following modes:
• Scene auto selector, Portrait or Night portrait (when Tripod is
selected) scene mode (A40)
• When shooting mode is set to j, k, l, m or M (when Face priority
(E38) is selected for AF area mode option)
The Blink Warning Screen
Faces detected by the blink warning are
displayed inside a border.
The operations described below are available.
• To enlarge the face: Move the zoom control
toward g (i). If more than one face is
detected, use the multi selector JK to select
the desired face.
• To switch to full-frame playback: Move the
zoom control toward f (h).
If you press the k button, or if no operations are performed for a few seconds,
the camera returns to shooting mode.
B Notes About Blink Warning
• The blink warning is disabled in the following situations.
- When the smile timer is selected (A64)
- When an option other than Single (E32) is selected for continuous shooting
- When an option other than Off (E37) is selected for exposure bracketing
- When On (E43) is selected for Multiple exposure mode
• The blink warning may not function properly in some shooting conditions.
Press the d button M z tab (A13) M Blink warning
Option Description
On
When one or more human subjects may have blinked in an
image captured using face detection, the Did someone
blink? screen is displayed in the monitor.
Check the image and determine whether or not another
image should be captured.
Off (default setting) Blink warning is disabled.
Exit
Exit
Zoom in
Zoom in
Did someone blink?
Exit
Zoom in