Nikon 26462B Digital Camera User Manual


 
73
Shooting Features
Metering
Allows you to set the method that the camera uses
to measure the brightness of the subject.
Default setting: Matrix
E31
Continuous
Allows you to select single or continuous shooting.
Default setting: Single
E32
ISO sensitivity
Allows you to control the camera’s sensitivity to light.
Default setting: Auto
When Auto is selected, E is displayed in the
monitor while shooting if ISO sensitivity increases.
In m (manual) mode, when set to Auto or Fixed
range auto, the ISO sensitivity is fixed at ISO 100.
E36
Exposure
bracketing
The exposure (brightness) can be changed
automatically during continuous shooting.
Default setting: Off
E37
AF area mode
Allows you to change the method of how the
camera selects the focus area for autofocus.
Default setting: Target finding AF
E38
Autofocus mode
Allows you to select either Single AF, which focuses
only when the shutter-release button is pressed
halfway, or Full-time AF, which continues focusing
even when the shutter-release button is not pressed
halfway.
Default setting: Single AF
E41
Flash exp. comp.
Allows you to adjust the flash output.
Default setting: 0.0
E41
Noise reduction
filter
Allows you to set the strength of the noise reduction
function that is normally performed when saving
images.
Default setting: Normal
E42
Active D-Lighting
Allows you to prevent loss of contrast details in
highlights and shadows and well reproduce the
natural contrast that is seen with the naked eye when
shooting images.
Default setting: Off
E42
Multiple
exposure
Allows you to combine two to three images and save
them as a single image.
Default setting:
- Multiple exposure mode: Off
- Auto gain: On
E43
Save user
settings
Allows you to save the current settings in mode dial
M (A57).
58
Option Description A