Filter
Top Products
E59
The Setup Menu
Reference Section
Sound Settings
Adjust the following sound settings.
B Note About Sound Settings
In Pet portrait scene mode, button and shutter sounds are disabled.
Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the monitor will be turned off and the camera will enter standby
mode (A21) to save power. In this option, set the time allowed to elapse before
the camera enters standby mode. 30 s, 1 min (default setting), 5 min, and 30 min
can be selected.
C When the Monitor Turns off for the Power Saving Function
• Power-on lamp flashes in standby mode.
• Camera turns off after approximately three minutes passes in standby mode.
• To reactivate the monitor while the power on lamp is flashing, press any of the following buttons:
- Power switch, shutter-release button, A button, c button or b (e movie-record) button
C Auto Off Settings
• The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
- When a menu is displayed: three minutes
- During slide show playback: up to 30 minutes
- When the AC adapter EH-62G is connected: 30 minutes
• The camera does not enter standby mode when transferring images using an Eye-Fi card.
Press the d button M z tab M Sound settings
Option Description
Button sound
Select On (default setting) or Off. When On is selected, a beep
will sound once when operations are completed successfully,
twice when the camera acquires focus on the subject, and
three times when an error is detected. Start-up sound will also
play when the camera is turned on.
Shutter sound
Select On (default setting) or Off. No sound is played with
shutter release when some features such as continuous
shooting or BSS (Best Shot Selector) are enabled or recording
movies, even if On is selected.
Press the d button M z tab M Auto off