Filter
Top Products
20
s
A
Removing Batteries and Memory Cards
After turning the camera off, confirm that
the memory card access lamp (
0
3) is off
and open the battery-chamber/memory
card slot cover. To remove the battery, first
release it by pressing the orange battery
latch in the direction shown by the arrow
and then remove the battery by hand.
To remove a memory card, first press the
card in to eject it (q); the card can then
be removed by hand (w).
Care should be
taken to prevent the card popping from
the camera when ejected.
D
Memory Cards
• Do not remove memory cards from the camera, turn the camera
off, or remove or disconnect the power source during formatting
or while data are being recorded, deleted, or copied to a com-
puter. Failure to observe these precautions could result in loss of
data or in damage to the camera or card.
• Do not touch the card terminals with your fingers or metal objects.
• Do not bend, drop, or subject to strong physical shocks.
• Do not apply force to the card casing. Failure to observe this pre-
caution could damage the card.
• Do not expose to water, heat, high levels of humidity, or direct
sunlight.
• Do not format memory cards in a computer.