227
n
❚❚The Optional FT1 Mount Adapter
Read this section for information on using the optional FT1
mount adapter. Before proceeding, be sure that you have read
and understood this manual and the documentation for the FT1
and lenses.
Autofocus
Autofocus is available only with AF-S lenses; other lenses sup-
port manual focus only. Set the camera focus mode to AF-S or
AF-C. The only AF-area mode available is Single-point and the
camera focuses on the subject in the center focus area only. Face
priority is not supported. In some cases, a beep may sound, the
in-focus indicator may be displayed, and pictures can be taken
when the camera is not in focus; if this occurs, focus manually.
Manual Focus
Follow the steps below to focus manually when using the FT1
with a NIKKOR F mount lens.
1
Select manual focus mode.
In the shooting menu, select Focus mode, highlight Manual
focus, press 2, and choose the magnification for the manual
focus display from 10×, 5×, 2×, and 1× (zoom off) (0 157).
2
Focus.
Rotate the lens focus ring until the
subject is in focus.