Filter
Top Products
94
Technical Notes
Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor and the
camera may stop functioning. In most cases, this phenomenon is caused by a strong
external static charge. Turn the camera off, remove and replace the batteries, and then
turn the camera on again. In the event of continued malfunction, contact your retailer
or Nikon representative. Note that disconnecting the power source as described above
may result in the loss of any data not recorded to internal memory or the memory card
at the time the problem occurred. Data already recorded will not be affected.
PictureProject does not start when
camera is connected
• Camera is off.
• Batteries are exhausted.
• USB cable is not correctly connected.
• Appropriate USB option is not
selected.
• Camera is not registered in Device
Manager (Windows only).
See the PictureProject reference man-
ual (on CD) for further information.
13
13
49
51
—
Pictures not displayed on television Choose correct video mode. 48
Format memory > Format
option not available
Batteries are low. 13, 70
Problem Cause/Solution