Filter
Top Products
30
Shooting Features
• When you point the camera at a dog or cat, the camera detects the pet’s face and
focuses on it. By default, the camera detects a dog or cat face and automatically
releases the shutter (pet portrait auto release).
• Tap F on the shooting screen and select Single or Continuous in Continuous.
- U Single: The camera captures one image when a dog or cat face is detected.
- V Continuous: The camera captures three images continuously when a dog
or cat face is detected.
B Pet Portrait Auto Release
• Tap F on the shooting screen and select On or Off in Pet portrait auto release.
- Yo On: The camera detects a dog or cat face and automatically releases the
shutter.
- p Off: The camera does not release the shutter automatically, even if a dog or
cat face is detected. Press the shutter-release button. The camera also detects
human faces when Off is selected.
• Pet portrait auto release is set to Off after five bursts have been taken.
• Shooting is also possible by pressing the shutter-release button, regardless of the
Pet portrait auto release setting.
When Continuous is selected, you can take pictures continuously while holding
down the shutter-release button all the way.
B Focus Area
• When the camera detects a face, the face is
displayed inside a yellow border. When the
camera acquires focus on a face displayed inside a
double border (focus area), the double border
changes to green. If no faces are detected, the
camera focuses on the subject in the center of the
frame.
• Under some shooting conditions, the pet face
may not be detected and other subjects may be displayed inside a border.
O Pet portrait
880
880
25
m
0s
25
m
0s