Nikon COOLPIXP600B Digital Camera User Manual


 
46
Shooting Features
B Notes About HDR
Use of a tripod is recommended. Set Vibration reduction (A95) in the setup
menu to Off when using a tripod to stabilize the camera.
The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen in the monitor at the time of shooting.
When the shutter-release button is pressed all the way, the camera shoots images
continuously and saves the following two images.
- A non-HDR composite image
- An HDR composite image in which the loss of details in highlights or shadows is
minimized
If there is only enough memory to save one image, an image processed by D-
Lighting (A86) at the time of shooting, in which dark areas of the image are
corrected, is the only image saved.
Once the shutter-release button is pressed all the way, hold the camera still until a
still image is displayed. After taking an image, do not turn the camera off before the
monitor switches to the shooting screen.
Depending on the shooting conditions, dark shadows may appear around bright
subjects and bright areas may appear around dark subjects. You can compensate
by lowering the level setting.
y M oBacklighting
From the screen displayed after o Backlighting is selected, HDR (high
dynamic range) composition can be set.
•Off (default setting): The flash fires to prevent the subject from being hidden in
shadow. Shoot images with the flash raised.
Level 1
-
Level 3
: Use when taking images with very bright and dark areas in the
same frame. Select
Level 1
when there is less difference between bright and dark
areas, and
Level 3
when there is more difference between bright and dark areas.