Filter
Top Products
7
First Steps
Batteries
Read and follow the warnings and cautions on pages ii–iii and 75 of this manual. The camera
can be used with EN-EL5 batteries only; do not, under any circumstances, attempt to use other
types. If desired, the optional EH-62A AC adapter kit can be used to power the camera for
extended periods ( 72). Do not, under any circumstances, use another make or model of
AC adapter. Failure to observe this precaution could result in overheating or in damage to
the camera.
Removing the Battery
Turn the camera off before removing or inserting batteries. To
eject the battery, open the battery-chamber/memory card
slot cover and slide the battery latch in the direction shown.
The battery can then be removed by hand. Note that the bat-
tery may become hot during use; observe due caution when
removing the battery.
Inserting the Battery
After charging the battery, insert it as described below.
1
Open the battery-chamber/memory card slot
cover
2
Insert the battery
The orange battery latch is pushed aside as the
battery is inserted. The battery is fully inserted
when the latch clicks back into place.
Inserting the Battery
Inserting the battery upside down or backwards could
damage the camera. Check to be sure the battery is in
the correct orientation.
3
Close the battery-chamber/memory card slot
cover
©ቢ
ቢ
©ባ
ባ
©ቢ
ቢ
©ባ
ባ