Filter
Top Products
144
Setup Menu Options (continued)
PLAYBACK—SETUP MENU OPTIONS
Choosing the Video Standard: The Video Output Menu
The Video Output menu is used to select the standard for video output when the
camera is connected to a television or VCR. The default setting is NTSC. When
connecting the camera to PAL device, the setting must be changed.
In the setup menu, highlight Video Output and press the
multi selector to the right. The menu shown at right will be
displayed. Highlight the desired option and press the multi
selector to the right to put your choice into effect and return
to the setup menu.
OK
NTSC
PAL
Video Output
SET UP MENU
At a video-mode setting of PAL, the number of pixels in the video output will be selectively
reduced, with the result that images displayed on any PAL-compliant video device to which the
camera is connected will show a drop in resolution.
For more information on:
pg. 190 The setup menu
The following options are available:
Option Description
NTSC
Select this option when connecting the camera to NTSC de-
vices.
Adjusting Monitor Brightness: The LCD Brightness Menu
This option controls monitor brightness. In the setup menu,
highlight LCD Brightness and press the multi selector to
the right. The menu shown at right will be displayed. There
are five levels of brightness to choose from; press the multi
selector up to increase brightness, or down to decrease bright-
ness. The number indicates the amount of brightness, with 5
being the brightest setting. Press the multi selector to the right to put your choice
into effect and return to the setup menu.
2
LCD Brightness
SET UP MENU
PAL Select this option when connecting the camera to PAL devices.