Filter
Top Products
337
U
Dust off Ref Photo
Acquire reference data for the Image Dust Off option in
Capture NX 2 (available separately; for more information, see the
Capture NX 2 manual).
Dust off ref photo is available only when a CPU lens is mounted
on the camera.
A lens with a focal length of at least 50 mm is
recommended.
When using a zoom lens, zoom all the way in.
1 Choose a start option.
Highlight one of the following
options and press J.
To exit
without acquiring image dust
off data, press G.
• Start: The message shown at right will
be displayed and “rEF” will appear in
the viewfinder and control panel
displays.
• Clean sensor and then start: Select
this option to clean the image sensor
before starting.
The message shown at
right will be displayed and “rEF” will
appear in the viewfinder and control
panel displays when cleaning is
complete.
D Image Sensor Cleaning
Dust off reference data recorded before image sensor cleaning is
performed can not be used with photographs taken after image
sensor cleaning is performed.
Select Clean sensor and then start
only if the dust off reference data will not be used with existing
photographs.