Filter
Top Products
II "Cleanat Startup/$hutdown"
Choose from the following options:
_-_!!7!-0-1)_ti°o°n='T_=TTTT Description
L_ONCleanat startup The image sensor is automatically cleaned each time the camera is turned
on.
Cleanat The image sensor is automatically cleaned during shutdown each time
_OFF
shutdown the camera is turned off.
(0oo_ Cleanatstartup The image sensor iscleaned automatically at startup and at shutdown.
&shutdown
Cleaningoff Automatic image sensor cleaning off.
Select Clean at startup/shutdown.
Display the Clean image sensor menu as
described in Step 2 on the previous page.
Highlight Clean at startup/shutdown and
press I_.
2
Select an option.
Highlight an option and press _).
®
[I_ Image Sensor Cleaning
Using camera controls interrupts image sensor cleaning. Image sensor cleaning may not be
aerformed at startup if the flash is charging.
Cleaning is performed by vibrating the low-pass filter. If dust can not be fully removed using
the options in the Clean image sensor menu, clean the image sensor manually (_ 286) or
consult a Nikon-authorized service representative.
If image sensor cleaning is performed several times in succession, image sensor cleaning
may be temporarily disabled to protect the camera's internal circuitry. Cleaning can be
aerformed again after a short wait.
285