Nikon f/4G IF Camera Lens User Manual


 
24
En
14. Supplied accessories*
• Slip-on front lens cap • Rear lens cap LF-1 • Lens hood HK-30
• Semi-soft case CL-L2 (with dedicated interior cushioning material)
• Dedicated slip-in filter holder • 52mm screw-in NC filter
• Dedicated lens protective glass • Dedicated lens protective glass case
• Strap LN-1
* The lens protective glass is attached to the lens when shipped. If dedicated accessories are
broken or missing, contact your nearest Nikon service center or representative office.
15. Optional accessories
• 52mm screw-in filters (except circular polarizing filter II)
• Slip-in circular polarizing filter C-PL1L
• AF-S Teleconverters (TC-14EII/TC-17EII/TC-20EII. The TC-17EII and TC-20EII do not provide
autofocus.)
16. Specifications
Type of lens: G-type AF-S Zoom-Nikkor lens having built-in CPU and Nikon
bayonet mount. Special vibration reduction (VR) mechanism
incorporated
Focal length: 200 to 400mm
Maximum aperture: f/4
Lens construction: 24 elements in 17 groups (4 ED glass), as well as 1 detachable
protective glass
Picture angle: 12˚20’–6˚10’ [8˚– 4˚ with Nikon digital cameras (Nikon DX format);
9˚50’– 5˚ with IX240 system cameras]
Focal length scale: 200, 250, 300, 350, 400mm
Distance information: Output to camera body
Zooming: Manually via separate zoom ring
Focusing: Nikon Internal Focusing (IF) system (utilizing an internal Silent Wave
Motor); manually via separate focus ring.
Vibration reduction: Lens-shift method using voice coil motors (VCMs)
Shooting distance scale: Graduated in meters and feet from 2m (7 ft.) to infinity ()
Closest focusing distance: 2m (6.6 ft.) at all zoom settings in AF mode
1.95m (6.4 ft.) at all zoom settings in MF mode
Diaphragm: Fully automatic
Aperture scale: f/4–f/32
Exposure measurement: Via full-aperture method with cameras with CPU interface system
Focusing limit switch: Provided; two ranges available: FULL (–2m), or –6m
Tripod collar: Rotatable through 360˚, lens rotating position index at 90˚, tripod
collar only detachable