Flash Synchronization
To remove the lens from the camera, press down on the lens release button and turn the
lens clockwise until the black dot on the lens barrel lines up with the black dot on the
front of the camera body. The lens will slip off easily.
To mount a different lens, place it in position in the camera's bayonet mount, align the
black dots and twist the lens barrel counterclockwise until the lens locks into place with a
click.
Note: With the 6mm f/5.6 Fisheye-Nikkor and 10mm f/5.6 OP Fisheye-Nikkor lenses,
the mirror must be locked in the "up" position before mounting.
Caution: A body cap should be
placed over the lens opening to
protect the interior of the
camera whenever the lens is
removed for any length of time.
The lens opening should not be
exposed to bright sunlight when
the lens is removed, especially
when the camera is loaded with
film. When the lens is handled
or stored separately, front and
rear lens caps should be used to
protect the lens surfaces and
interior from dust and damage.