Filter
Top Products
-OPERATION-continued-----------------------
FOCUSING LAMP
If the ambient
li
ght
is
dim, push the
LAMP
button to
illuminate the subject for focusing. After removi ng
your finger from the button, the lamp stays on for 16
seconds, then turns
off
automatically to conserve power.
If
necessary, you can press the button once again. After
taking a picture using the ringlight, the focusing lamp
immediately goes out. To turn the focusing
lamp
off
before the 16-sec. automatic timing period
is
up, simply
switch off the power supply.
If
the focusing lamp fails to light
up
after the
LAMP
button
is
pushed, it needs replacement. First, remove the
power cord from the lens; then remove the lamp cover
by
unscrewing it counterclockwise. Then,
whil
e applying
pressure, turn the old bulb counterclockwise and replace
it with a
new
one.
Align
the protrusions
at
the
base
of
the
new
bulb with the notched portion
of
the lamp
housing and, while app lying pressure, turn the bulb
clockwise until it
is
fully seated into position. Finally,
replace the lamp cover. For your convenience, a spare
bulb
is
provided with the lens.