4
4.1
4.2
· 20
Set
Focus
Mode
Selector
to
AF
When the focus mode selector
is
set to
AF
(autofocus), the
camera focuses automatically.
Set the focus mode selector to AF (autofocus).
• Make sure to turn the focus mode selector until it clicks into position.
•
To
focus, lightly press the shutter release button. (See page 24.)
Situations where autofocus may not work as
expected:
• Autofocus may not work
as
expected
in
the following situations.
In
such
situations, focus on a different subject located at the same distance, use
focus lock (page
38)
then recompose.
• When you are unable
to
perform foc·us lock, set the focus mode selector
to M (manual) and focus manually using the clear matte field.