Filter
Top Products
TTL Mode
3D Multi Flashing Mode
(3D MULT-Mode)
Manual Mode
Press the Mode Select Button
Press the Zoom button
With A-group cameras, repeated pressing
of the mode button will cycle the flash display
from 3DMULT Mode to TTL and through the
manual power ratio settings, returning to the
3DMULT Mode. (Other cameras will return to
the TTL Mode)
This mode can be used only when using an A-group camera.
When using a D-group camera, D-TTL
Mode will be set.
6
Mode Select Button
Note; this chart shows how to select the functions and set the PZ40X using the Mode Select Button and the Zoom button.
English