Filter
Top Products
98
General Camera Setup
General Camera Setup
The Setup Menu
The following settings can be changed in the setup
menu by selecting the z tab.
Press the d button M z (Setup) tab (A 12)
Option Description
A
Welcome screen
Allows you to select the picture displayed as the welcome
screen when the camera is turned on. Select COOLPIX to
display the COOLPIX logo. Select Select an image to use a
picture taken with the camera as the welcome screen.
E 60
Time zone and
date
Allows you to set settings related to the camera’s date and
time. The Time zone setting allows you to specify the time
zone where the camera is mainly used and whether or not
daylight saving time is in effect. When the travel
destination (x) is selected, the camera automatically
calculates the time difference between the travel
destination and the home time zone (w), and saves
pictures using the date and time of the travel destination.
E 61
Monitor settings*
Allows you to select the kind of information that is
displayed during shooting mode and playback mode. If
you select Framing grid+auto info, a grid is displayed
when shooting to help you frame the shot. The default
setting is Auto info.
You can also set the photo information displayed in
playback mode, the image review settings, and the
monitor brightness.
• The Image review and Brightness settings are not
available when the projector is in operation.
E 64
Projector settings*
When power saving mode is enabled, projector brightness
is automatically adjusted to save power.
The default setting is Off.
E 65
Welcome screen
Time zone and date
Monitor settings
Vibration reduction
Motion detection
Projector settings
Print date
Set up