Nikon S6200 Camcorder User Manual


 
88
General Camera Setup
General Camera Setup
The Setup Menu
The following settings can be changed in the setup
menu by selecting the z tab.
Press the d button M z (setup) tab (A10)
Option Description A
Welcome screen
Allows you to select the image displayed as the welcome
screen when the camera is turned on. Select COOLPIX to
display the COOLPIX logo. Select Select an image to use a
picture taken with the camera as the welcome screen. The
welcome screen is not displayed by default.
E54
Time zone and date
Allows you to set settings related to the camera’s date and
time. The Time zone setting allows you to specify the time
zone where the camera is mainly used and whether or not
daylight saving time is in effect. When the travel
destination (x) is selected, the camera automatically
calculates the time difference between the travel
destination and the home time zone (w), and saves
images using the date and time of the travel destination.
E55
Monitor settings
Allows you to adjust settings related to the monitor.
Photo info allows you to select the kind of information
that is displayed during shooting mode and playback
mode. If you select Framing grid+auto info, a grid is
displayed when shooting to help you frame the shot.
The Image review setting allows you to determine
whether or not the captured image is displayed
immediately after shooting.
Brightness allows you to adjust the brightness of the
monitor.
E58
Print date
Allows you to imprint the shooting date and time on
images at the time of shooting. The default setting is Off.
The shooting date and time are not imprinted on
panorama images or movies.
E60
Vibration reduction
Allows you to reduce blurring caused by camera shake
when shooting. The default setting is Off.
When using a tripod to stabilize the camera during
shooting, set this feature to Off to prevent this feature
from malfunctioning.
E61
Set up
Welcome screen
Time zone and date
Monitor settings
Print date
Motion detection
AF assist
Vibration reduction