Filter
Top Products
19
Charging the Battery
First Steps
Turning On and Off the Camera
Press the power switch to turn on the camera. The
power-on lamp (green) will light for a moment and the
monitor will turn on.
Press the power switch again to turn off the camera.
When the camera turns off, both the power-on lamp
and monitor will turn off.
• When the camera is off, holding down the c button will turn the camera on in
playback mode (A 30).
C Auto Power Off in Shooting Mode (Standby Mode)
If no operations are performed for about a minute (default setting), the monitor will turn off
automatically and the camera will enter standby mode. If no operations are performed for another
three minutes, the camera will turn off automatically (the auto off function).
• If the monitor is off in standby mode (the power-on lamp is blinking), press the power switch or
the shutter-release button to reactivate it.
• The time allowed to elapse before the camera enters standby mode can be changed from the
Auto off option (A128) in the setup menu (A116).