Filter
Top Products
2
1: Get Ready
Con guring the WT-4 for Upload to a Computer (Ad-hoc Mode)
Mac OS X (10.5.2)
1: Get Ready
Equipment
Ready the following:
• A WT-4 wireless transmitter *
• A fully-charged EN-EL3e battery for the WT-4
• A Nikon D3 or D300 digital SLR camera
• A fully-charged battery for the camera (an EN-EL4a for the D3, a EN-EL3e for the D300)
• A computer with Mac OS X (10.5.2) *, the WT-4 Setup Utility* installed
• A memory card
• A USB cable
• Manuals for the above equipment
Network Settings
Note the IP addresses, encryption, and other settings that will be used in the wireless LAN. The following are
intended as examples only.
• IP address for the WT-4: 192.168.1.4
• IP address for the computer 192.168.1.3
• Subnet mask: 255.255.255.0
• Network name (SSID): WT-4
• Communication mode: Ad hoc
• Channel: 1
• Authentication: open system
• Authentication: WEP64
• Encryption key: abc12
• Key Index: 1
* WT-4 rmware version 1.1 and the WT-4 Setup Utility version 1.1 are required when using the WT-4 under Mac
OS X version 10.5.2. Updates to the WT-4 rmware and Setup Utility are available on the Nikon website for your
area.