Filter
Top Products
6
3: Con gure the Network
Con guring the WT-4 for Upload to a Computer (Ad-hoc Mode)
Mac OS X (10.5.2)
3 - 6
After choosing a network name and channel and
adjusting encryption and password options as
described below, click OK.
Name: Enter a name of up to 32 characters. The network in this example uses the identi er WT-4.
Channel: Choose a channel.
Require Password: Select this option to enable WEP encryption.
Password: If WEP encryption is enabled, enter a security key. The length of the key depends on the option
selected for Security:
- 40-bit (more compatible): Enter a ve-character ASCII or ten-digit hexadecimal key.
- 128-bit: Enter a 13-character ASCII or 26-digit hexadecimal key.
ASCII keys may contain letters, punctuation, and the numbers 0–9, hexadecimal keys the numbers 0–9 and
the letters a, b, c, d, e, and f.
Security: Choose the length of the WEP key.
3 - 7
Open the System Preferences > Network panel
and con rm that the Network Name is the same
as that speci ed in 3 - 6. Network setup is now
complete.
•
•
•
•
•