Filter
Top Products
getting started
getting started
7
getting started
getting started
In addition to the internal fl ash memory,
your camcorder can also store data
on a Secure Digital (SD) card or a
MultiMedia card (MMC).
Insert a memory card:
To insert a memory card, fi rst open the
cover on the bottom of the camcorder,
and then gently push the card into the
card slot as indicated until the card
reaches the end of the slot.
Remove a memory card:
To remove the memory card, gently
push the memory card for the card to pop up. Then pull the card
out of the slot.
Note: The SD card comes with a
write-protect switch. When the
write-protect switch is set to the
Lock position, the card will become
non-writable. To ensure that the
camcorder can operate normally, you
should set the write-protect switch to
the Unlock position before inserting
the SD card.
Inserting a memory card (optional)
When a memory card is correctly inserted and detected, the card
icon ( ) will display on the LCD screen.
Do not insert or remove the memory card while the camcorder is
reading or writing data.
When a memory card is inserted, the camcorder will use the card
as the main storage medium. Files stored in the built-in memory
will become inaccessible until the memory card is removed.
If you purchase a new memory card, you are recommended to
format the card with this camcorder before storing data into the
card.
Beveled corner