Using the Nokia Image Frame
27
Copyright
© 2004 Nokia. All rights reserved.
limit is reached during the image transfer, the transfer is disconnected so that
only 50 images in total are stored to the Nokia Image Frame.
1. If you want the images in the Nokia Image Frame to be in a certain order, press
briefly or to scroll to the image after which you want to store the new
images.
2. Direct the IR ports of the Nokia Image Frame and the compatible image source
device toward each other, and ensure that there are no obstructions between
the devices. The maximum allowed distance is up to 1.5 m and the
transmission angle 15
o
.
3. Activate the image source device’s IR connection. For more information on
how to do this, refer to the user’s guide of that device.
4. Press to enter the active IR reception mode. The Nokia Image Frame
displays the icon.
5. During the image transfer, the Nokia Image Frame displays the icon and
the received images one by one.
6. After all the images have been received, the Nokia Image Frame returns to the
previous mode, and the images are stored as the next images after the
currently displayed image.
If you want to edit the new images, see Editing the images on page 23.