Filter
Top Products
Using Nokia Medallion II
11
English
■
Receiving an image with Nokia Medallion II
When the power is switched on, Nokia Medallion II can receive images.
Note that Nokia Medallion II may resize and crop the received images to
display them. The received images are also saved in the original format
and if you want to forward a received image, Nokia Medallion II sends it
in the original format.
1. Point the IR ports of Nokia Medallion II and the compatible sending
device at each other and ensure that there are no obstructions
between the devices or other active IR devices nearby.
2. Press briefly to activate the IR port of Nokia Medallion II to
receive an image.
3. The user of the sending device starts to send the image. For more
information on how to send the image from the other device, refer to
the user guide of that device. The icon indicates that the image is
successfully sent.
■
Deleting an image from Nokia Medallion II
When the power is switched on, select the image you want to delete so
that it is on the display.
To begin deleting the image, press and simultaneously. The
indicator shows that you are going to delete an image.
To delete the image, simultaneously press and again within three
seconds . Otherwise, the images will not be deleted. The image
disappears in approximately three seconds.
Remember to make backup copies of your images by, for example,
sending and saving them to another compatible device.