Nortel Networks P5100 Digital Camera User Manual


 
49
Shooting in P, S, A, and M Modes
P, S, A and M modes
Shooting in M (Manual)
1 Rotate the mode dial to M.
2 Press the multi selector K to activate the
shutter speed setting.
The active setting switches between shutter speed and
aperture each time the multi selector K is pressed.
At speeds slower than 1/4 sec., the shutter speed
indicator turns red (A 47).
3 Rotate the command dial to choose
a shutter speed between 1/2,000
sec. and 8 sec.
When adjusting aperture or shutter speed,
the degree of deviation from the exposure
value measured by the camera is displayed
for a few seconds in the exposure display.
The degree of deviation in the exposure
display is shown in EVs (-2 to +2 EV in
increments of 1/3 EV). A display similar to
that illustrated at right indicates that the
picture will be overexposed by 1 EV (+1).
4 Press the multi selector K to activate the
aperture setting.
17
17
17
F
F
1/125
1/125
1/125 F4.3
F4.3
F4.3
17
17
17
F
F
1/125
1/125
1/125 F4.3
F4.3
F4.3
17
17
17
F
F
1/250
1/250
F2.7
F2.7
1/250 F2.7
+2 -20
+
+1 -1
Overexposed Underexposed
Values in EVs
17
17
17
F
F
1/250
1/250
F4.3
F4.3
F4.31/250