Olympus 227515 Camcorder User Manual


 
31
EN
For information on using the menus, see “Using the Menu” (p. 4).
When erasing pictures in a internal memory,
do not insert the card into the camera.
When erasing pictures from the card, insert
a card into the camera in advance.
To erase all images [ALL ERASE]
1 Use FG to select [ALL ERASE], and
press the H button.
2 Use FG to select [YES], and press the
H button.
To individually select and erase
images [SEL. IMAGE]
1 Use FG to select [SEL. IMAGE], and
press the H button.
2 Use HI to select the image to be
erased, and press the H button to add a
R mark to the image.
Press the W zoom button to display an index
view. Images can be quickly selected using
FGHI. Press the T button to return to the
single frame display.
MENU
OK
SEL. IMAGE
ERASE/CANCEL
R mark
3 Repeat Step 2 to select the images to be
erased, and then press the m button
to erase the selected images.
4 Use FG to select [YES], and press the
H button.
The images with a R mark are erased.
Saving print settings to the image data
[PRINT ORDER]
q (Playback menu) X PRINT ORDER
“Print Reservations (DPOF)” (p. 40)
Print reservation can be set only for still
images that are recorded to the card.
Protecting images [0]
q (Playback menu) X 0
Protected images cannot be erased by
[ERASE] (p. 18, 30), [SEL. IMAGE], or [ALL
ERASE] (p. 30), but all images are erased
by [MEMORY FORMAT]/[FORMAT] (p. 32).
1 Use HI to select an image.
2 Press the H button.
Press the H button again to cancel the
settings.
3 If necessary, repeat Steps 1 and 2
to protect other images, and press the
m button.
Rotating images [y]
q (Playback menu) X y
1 Use HI to select an image.
2 Press the H button to rotate the image.
3 If necessary, repeat Steps 1 and 2 to
make settings for other images, and press
the m button.
The new picture orientations will be saved
even after the power is turned off.
Adding sound to still images [R]
q (Playback menu) X R
1 Use HI to select an image.
2 Aim the microphone toward the sound
source.
Microphone
FE-4040 FE-4020/X-940
3 Press the H button.
Recording starts.