12
EN
Charging the battery with the
included USB-AC adapter
The included USB-AC adapter (F-2AC)
(hereafter referred as AC adapter) has
been designed to be used for charging
and playback. Make sure that shooting
is not being used while the AC adapter is
connected to the camera.
1
2
3
1
Multi-connector
AC outlet
Connector
cover
USB cable (supplied)
3
1
Multi-connector
AC outlet
Connector
cover
USB cable (supplied)
Indicator lamp
On: Charging
Off: Charged
Indicator lamp
On: Charging
Off: Charged
The battery is not fully charged at shipment.
Before use, be sure to charge the battery
until the indicator lamp turns off (up to
3 hours).
If the indicator lamp does not light, the AC
adapter is not connected to the camera
correctly, or the battery, camera, or AC
adapter may be broken.
For details on the battery and the AC
adapter, see “Battery, USB-AC adapter
(included), Charger (sold separately)”
(p. 57).
Battery can be charged by connecting
the camera to the computer. However,
when charging with the system other than
Windows XP (SP2 or later)/Windows Vista/
Windows 7, charging takes much time.
When to charge the batteries
Charge the battery when the error message
shown below appears.
Monitor top left Error message
Flashes in red
44
BATTERY EMPTY
14
M
When not using a computer
See the next section under “Setting the date,
time and time zone.”
When using a computer with system
other than Windows XP (SP2 or later)/
Windows Vista/Windows 7
The Instruction Manual PDF fi le can be
saved on a computer with the following
procedure.
Connect the camera to the computer and
copy the instruction manual PDF fi le for
your language in the “Manual” folder in the
internal memory of the camera.