Filter
Top Products
26
EN
3 Move the camera slowly while keeping it
straight, and stop the camera where the
pointer and target mark overlap.
The camera releases the shutter
automatically.
AUTOAUTO
MENU
OK
SAVECANCEL
To combine only two pictures, press the
A button before taking a third frame.
4 Repeat Step 3 to take a third frame.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without
saving an image, press the m button.
If the shutter does not automatically release,
try [MANUAL] or [PC].
Taking pictures with [MANUAL]
1 Use HI to specify at which edge the
next picture is to be connected.
MANUALMANUAL
1 212
MENU
BACK
Direction for
combining the
next frame
2 Press the shutter button to take the fi rst
frame.
1st frame
MANUALMANUAL
1 212
MANUALMANUAL
1 212
MENU
BACK
MENU
OK
SAVECANCEL
Joint areas
3 Compose the next shot so that joint area
1 overlaps joint area 2.
Composition of the 2nd frame
MANUALMANUAL
1 212
MENU
OK
SAVECANCEL
4 Press the shutter button to take the next
shot.
To combine only two pictures, press the
A button before taking the third frame.
5 Repeat steps 3 and 4 to take a third
frame.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without
saving an image, press the m button.