Olympus 227655 Camcorder User Manual


 
32
EN
Sequential shooting (Drive)
Pictures are taken sequentially while the shutter
button is held down.
1
Select the drive option in the
shooting function menu.
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
PP
SEQUENTIALSEQUENTIAL
Option Description
o
One frame is shot each time the
shutter button is pressed.
j
*1
Take sequential shots using the
focus, brightness (exposure) and
white balance set in the rst frame.
W
The camera takes sequential shots
at a faster speed than in [j].
*1
The shooting speed varies depending on the
settings for [IMAGE SIZE/COMPRESSION] (p. 33).
When set to [j], the ash (p. 28) cannot
be set to [REDEYE]. In addition, when set to
[W] the ash is xed to [FLASH OFF].
When set to [W], [IMAGE SIZE] is limited
to [3] or lower, and the ISO sensitivity is
xed to [ISO AUTO].
Using the LED illuminator
(STYLUS TOUGH-8010/ TOUGH-8010 and
STYLUS TOUGH-6020/ TOUGH-6020 only)
In a dark location, the LED illuminator can
be used as an auxiliary light to see things or
compose shots.
1
Set [LED ILLUMINATOR] (p. 52) to
[ON].
2
Press and hold F down until the
LED illuminator lights up.
If you perform an operation when the LED
illuminator is on, it will illuminate up to approx. 90
seconds.
LED
illuminator
The LED illuminator turns off if no operation
is performed for approx. 30 seconds.
Even when the camera’s power is turned
off, if F is pressed until the LED illuminator
lights up, it lights for 30 seconds.
To turn the LED illuminator off
Press and hold F down, until the LED
illuminator turns off.