Filter
Top Products
29
EN
Sequential shooting (Drive)
Pictures are taken sequentially while the shutter
button is held down.
1
Select the drive option in the
shooting function menu.
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
PP
SEQUENTIALSEQUENTIAL
Option Description
o
One frame is shot each time the
shutter button is pressed.
j
*1
Take sequential shots using the
focus, brightness (exposure) and
white balance set in the fi rst frame.
c
The camera takes sequential shots
at a faster speed than in [j].
d
The camera takes sequential shots
at approximately 10.2 frames/sec.
B
The camera takes sequential shots
at approximately 15.2 frames/sec.
i
Sequential shooting while
adjusting the focus for each image.
7
Sequential shooting that
automatically changes the
exposure for each frame while
using the focus and white balance
that were locked at the fi rst frame
(Bracket shooting). “7” (p. 33)
TIMELAPSE
The camera takes sequential
shots automatically for the number
of pictures and interval specifi ed.
“SET TIME LAPSE” (p. 34)
*1
The shooting speed varies depending on the
settings for “image quality” (p. 30).
When set to [j], the fl ash (p.26) cannot
be set to [REDEYE]. In addition, when set
to [c], [d] or [B] the fl ash is fi xed to
[FLASH OFF].
[IMAGE SIZE] is limited to [n] or lower
when set to [c] or [d], and to [2] or
lower when set to [B]. The ISO sensitivity
is fi xed at [ISO AUTO] in both cases.
Setting of recording sound when shooting
still images (R) is disabled when taking
sequential shots.
Timelapse shooting
Once the shutter button is pressed, the fi rst
shot will be taken, and subsequently all
other shots will be taken automatically. The
camera automatically enters sleep mode
after the fi rst frame has been saved. Sleep
mode is exited around 7 seconds before the
next shot. Once the preset number of frames
is taken, the camera automatically turns off.
Use of charged batteries or an AC adapter
is recommended when taking frames over
an extended period of time.
If any of the following operations are
performed while the camera is in sleep
mode, the camera cancels timelapse mode
and returns to normal shooting: opening
of the battery/card compartment cover,
connecting the camera to a computer,
pressing the shutter button or wheel
controller.
If the internal memory or card or the battery
power runs out during timelapse mode, a
warning is displayed, [TIMELAPSE] mode
is canceled and the camera automatically
turns off.