Filter
Top Products
34
EN
Basic wireless photography
This function will be explained using an example of the electronic flash
used together with an Olympus digital SLR camera E-3. Refer to the
camera’s instruction manual for details on the setup range of flash and
the operations on the camera.
1 Place the camera and the electronic
flash. g “About the placement of the
electronic flash” (P. 36)
2 Press the MODE button of the electronic
flash repeatedly to set the flash control
mode to RC mode.
MODE button
3 Set [#RC MODE] on the camera to [ON] and set the camera’s
built-in flash to a condition that it can be emitted.
Set the flash mode and the flash intensity on the camera.
RC mode
2
LOM
TTL
1 / 8
–
+1.0
OFF
2007. 12.16
Group
Select the flash mode
and adjust the flash
intensity individually for
groups A, B, and C. For
MANUAL mode, select
the flash intensity.
Flash intensity
value
Flash control
mode
Flash intensity
Normal flash/Super FP
flash
Switch between
normal flash and
Super FP flash.
Communication light
level
Set the
communication light
level to [HI], [MID], or
[LO].
Channel
Set the
communication
channel to the same
channel used on the
electronic flash.