Filter
Top Products
Button operations
16
EN
Press 1F in shooting mode, use the arrow pad to select the
frame with the desired brightness. Press e to confirm your
selection.
• Adjustable from -2.0EV to +2.0 EV.
Press 3# in shooting mode to select the flash setting.
Press e to confirm your selection.
Press 2Y in shooting mode to select on and off for the self-timer.
Press e to confirm your selection.
• After pressing the shutter button completely, the self-timer lamp lights for approximately 10
seconds, blinks for approximately 2 seconds, and then the picture is taken.
• To cancel the self-timer, press 2Y.
• Self-timer shooting is automatically canceled after one shot.
Press
4&
in shooting mode to select the macro mode.
Press e to confirm your selection.
• Zoom and flash cannot be used in super macro mode.
1F button Changing picture brightness (Exposure Compensation)
3# button Flash shooting
AUTO (Auto-flash) The flash fires automatically in low light or backlight conditions.
! Red-eye reduction flash This emits pre-flashes to reduce the occurrence of red-eye in
your pictures.
# Fill-in flash The flash fires regardless of the available light.
$ Flash off The flash does not fire.
2Y button Self-timer shooting
Y OFF Cancel the self-timer.
Y ON Set the self-timer.
4& button Shooting pictures close to the subject (Macro mode)
OFF Macro mode is deactivated.
& Macro mode This mode lets you shoot as close as 20 cm/7.9 in. (wide) and
60 cm/23.6 in. (tele) from your subject.
% Super macro mode This mode lets you shoot as close as 3 cm/1.2 in. from your
subject. If the distance between the camera and the subject is
over 70 cm/27.6 in., the picture will be out of focus.
8
0.0
0.0
+0.7
+0.7
+0.3
+0.3
+1.0
+1.0
F
Use 43 to change
the display.
9
0
a
d4357_e_0000_72.book Page 16 Monday, July 30, 2007 10:01 AM