Filter
Top Products
Button operations
EN 17
Press 1 F in shooting mode, use the arrow pad 43 to select
the frame with the desired brightness. Press e to confirm
your selection.
Press 3# in shooting mode to select the flash setting.
Press e to confirm your selection.
Press 2Y in shooting mode to select ON and OFF of the self-timer.
Press e to confirm your selection.
• After pressing the shutter button completely, the self-timer lamp lights for approximately 10
seconds, blinks for approximately 2 seconds, and then the picture is taken.
• To cancel the self-timer, press 2Y.
• Self-timer shooting is automatically canceled after one shot.
Press 4& in shooting mode to select the macro mode.
Press e to confirm your selection.
• Zoom and flash cannot be used in super macro mode.
8 1 F button Changing picture brightness (Exposure Compensation)
9 3# button Flash shooting
AUTO
(Auto-flash)
The flash fires automatically in low light or backlight conditions.
! Red-eye reduction
flash
This emits pre-flashes to reduce the occurrence of red-eye in
your pictures.
# Fill-in flash
The flash fires regardless of the available light.
$ Flash off
The flash does not fire.
0 2Y button Self-timer shooting
OFF
Cancel the self-timer.
ON
Set the self-timer.
a 4& button Shooting pictures close to the subject (Macro mode)
OFF
Macro mode is deactivated.
&
Macro mode This mode lets you shoot as close as 20cm/7.9 in.(wide) and 60
cm/23.6 in. (tele) from your subject.
%
Super macro
mode
This mode lets you shoot as close as 3cm/ 1.2 in.from your subject.
If the distance between the camera and the subject is over 70 cm/
27.6 in., the picture will be out of focus.
n
ging picture brightness (Exposure Compensation)
0.0
0.0
+0.3
+0.3
+0.7
+0.7
+1.0
+1.0
F
Use 43 to change the
display.
• Adjustable from -2.0 EV to +2.0 EV.
ash shooting
-
timer shooting
o
ting pictures close to the subject (Macro mode)
d4359_e_0000.book Page 17 Friday, November 16, 2007 6:51 PM