Filter
Top Products
EN
49
Using OLYMPUS Master
To disconnect the camera
1 Make sure that the card access lamp has stopped
blinking.
2 Make the following preparations for
disconnecting the USB cable.
Windows
1 Click the “Unplug or Eject Hardware” icon in the system
tray.
2 Click the message that is displayed.
3 When a message is displayed saying that the hardware can
be ejected safely, click “OK”.
Macintosh
1 The trash icon changes to the eject icon when the “Untitled”
or “NO_NAME” icon on the desktop is dragged. Drag and
drop it on the eject icon.
3 Disconnect the USB cable from the camera.
Note
• Windows: When you click “Unplug or Eject Hardware”, a warning message may be displayed.
Make sure that image data is not being downloaded from the camera and that all applications
are closed. Click the “Unplug or Eject Hardware” icon again and disconnect the cable.
This camera is compatible with USB mass storage. You can connect the camera to your
computer using the USB cable provided with the camera to download and save images without
using OLYMPUS Master. The following environment is required to use the USB cable to
connect the camera to your computer.
Windows: Windows 2000 Professional/XP Home Edition/XP Professional/Vista
Macintosh: Mac OS X v10.3 or later
Note
• If your computer is running Windows Vista, you can select [PC] in Step 3 on P. 47, press 3,
and select [MTP] to use Windows Photo Gallery.
• Data transfer is not guaranteed in the following environments, even if your computer is
equipped with a USB port.
• Computers with a USB port added by means of an extension card, etc.
• Computers without a factory-installed OS and home-built computers
To download and save images to a computer without using
OLYMPUS Master
Card access lamp
For detailed operations of OLYMPUS Master, refer to the quick start guide displayed
upon startup or the help of the OLYMPUS Master.