Filter
Top Products
Loading Batteries
Do not use incorrect batteries or mix new and old batteries at the same time.
Before replacing batteries, set the power switch to OFF.
Please remove the batteries from your camera during long periods in which the
camera is not in use.
Turn the lock screw on the bottom of the
grip with a coin as shown to remove the
battery case lid.
Insert the batteries correctly as shown and
replace the lid using a coin to turn the screw.
Use two 3V Lithium batteries (Panasonic
CR-123A or Duracell DL-123A batteries.)
* Try to avoid changing batteries while the
film is still in the camera. (With the
batteries removed the film counter
indicator will remain active for
approximately 30 minutes.)