56
4
Advanced shooting
PANORAMA - Panorama shooting
3 Make sure that the edges of the pictures overlap, then take your
pictures.
• Focus, exposure and white balance are set by the first picture. Do not select an
extremely bright subject (such as the sun) for the first picture.
• Panorama shooting is possible for up to 10 pictures.
• When you have taken 10 pictures, a warning mark
is displayed.
4 Press to finish panorama shooting.
• The frame on the screen disappears and the camera returns to the normal
shooting mode.
• The panorama mode is only available with Olympus xD-Picture
Card.
• Your computer’s memory may be insufficient if you take too many
panorama pictures in HQ or SHQ mode. You are recommended to
use SQ1/SQ2 mode for panorama shooting.
• During panorama shooting, the flash is not available.
• The camera itself cannot connect panorama pictures. The
CAMEDIA Master software is necessary to connect the pictures.
Note
When shooting, make sure that the edges (right/left/top/bottom) of the images
overlap, so that the CAMEDIAMaster software can correctly connect the pictures.