Filter
Top Products
28
LOADING THE BATTERIES
This camera uses 2 CR-V3 lithium battery packs or 4 AA NiMH batteries,
NiCd batteries, alkaline batteries or lithium batteries.
Make sure that the camera
power is off.
Slide the opening and closing
switch on the battery cover in
the direction of .
Slide the battery cover in the
direction of the arrow printed
on it with your fingertip to
open it.
• If you attempt to open it using a
fingernail, it could result in injury.
Insert the batteries with their
poles oriented in the right
direction.
• Insert the battery packs with
the CAMEDIA labels facing
outward and the concave
terminals facing each other.
Close the battery cover, then
press it down and slide it in
the opposite direction of the
arrow printed on it. Slide the
opening and closing switch
on the battery cover in the
direction of . The switch
will not lock unless the cover
is completely closed.
• When pressing the battery
cover shut, be sure to press
the center of the cover since it
may be difficult to close
properly by pressing the edge.
5
4
3
2
1
2
4
5
When using AA
batteries
When using lithium
battery packs
3