Olympus C-3020 Zoom Camcorder User Manual


 
18
ENGLISH
6
When is selected in green on
the screen, press
Ññ to select
the date format.
Select any one of the following
formats:
D-M-Y (Day/Month/Year)
M-D-Y (Month/Day/Year)
Y-M-D (Year/Month/Day)
This step and the following steps show the
procedure used when the date and time
settings are set to Y-M-D.
7
Press í to move to the year (Y) setting.
8
Press Ññ to set the year. When the year is set, press í to move to
the month (M) setting.
Repeat this procedure until the date and time are completely set.
To move back to the previous setting, press
É.
screen
9
Press .
The camera returns to the menu screen.
If is pressed again, the menu disappears.
For more accurate setting, press at the time of 00 seconds. The clock
starts when you press the button.
The current settings stay the same even when the power is turned off,
unless they are readjusted.
The date/time setting will be canceled if the camera is left with no batteries
for approximately 1 hour. If this happens, set the date/time again. If you
remove the batteries a short time after loading them in the camera, it may
take less than 1 hour for the date/time setting to be canceled.
SELECT
SET
GO
SELECT
SET
GO
SELECT
SET
GO
GETTING STARTED (Cont.)