Filter
Top Products
38
ENGLISH
Selected images can be reserved in a card for printing on a printer or at a
photo lab that supports the DPOF (Digital Print Order Format) system.
● Print reserve cannot be performed for a picture displayed with .
Single-frame print reserve
Press . The PRINT ORDER screen is displayed. Press
Ññ on the arrow
pad to select , then press . The print reserve selection screen is
displayed. Press the arrow pad to select the picture you wish to print. Press
. The setting menu is displayed. Press
Ññ to select x, or ,
then press
í. Press Ññ to select a setting for each item, then press to
save the setting. ( x: number of prints, : date/time display, :
trimming setting)
To save all the settings, press to exit from the selection screen. Press
twice to exit the Print reserve mode.
All-frame print reserve
Allows you to store print data for all the pictures on the card, as well as
allowing you to choose how many prints you want.
Trimming print reserve
You can print an enlarged part of a recorded picture.
Resetting print reserve
This resets all the print reserve settings for images saved in a card.
Press . The PRINT ORDER SETTING screen is displayed. If there are no
pictures on the card, this screen is not displayed. Press
Ññ to select
RESET, then press . To keep the print order, select KEEP and press .
● To remove the selected image only, select KEEP, then set the number of
prints in single- frame print reserve to 0.
● To perform print reserve for additional pictures, select KEEP. Print reserve
can be added to the print reserve data already stored on the card.
PRINT SETTINGS
● This camera cannot be directly connected to printers.
● If a card contains DPOF reservations set by another device, entering
reservations using this camera may overwrite the previous reservations. Be
sure to use this camera for reservations.