Olympus C-40 ZOOM Camcorder User Manual


 
33
Macro mode shooting
Usually focusing is slow when you get as close as 0.1 m - 0.8 m (0.3 ft - 2.6
ft) to the subject. However, in the mode focusing is performed quickly. The
(macro) mode allows you to shoot close to the subject (within 0.1 m - 0.8
m (0.3 ft - 2.6 ft)). With the zoom lever is pressed to the maximum W position,
you can fill the entire frame with your subject.
If you are close to a subject, the picture area in the viewfinder is different from
the picture that the camera actually records. For macro mode shooting, we
recommend using the monitor.
Press the button repeatedly until (Macro mode) or (Spot
metering+Macro mode) appears on the control panel.
Exposure Compensation
This function allows you to make fine changes to the present exposure
setting. In some situations, you may get better results when the exposure that
the camera sets is compensated (adjusted) manually. You can adjust
between +/–2.0 in 1/2 steps.
Adjusts towards +
(images become brighter)
Adjusts towards –
(images become darker)
í
É
1 C-40ZBasic-E1 01.10.11 9:39 AM Page 33